Navigation
This version of the documentation is archived and no longer supported.

db.collection.watch()

Definition

db.collection.watch(pipeline, options)

Opens a change stream cursor on the collection.

Parameter Type Description
pipeline array

A sequence of one or more of the following aggregation stages:

See Aggregation for complete documentation on the aggregation framework.

options document

Optional. Additional options that modify the behavior of watch().

You must pass an empty array [] to the pipeline parameter if you are not specifying a pipeline but are passing the options document.

The options document can contain the following fields and values:

Field Type Description
resumeAfter document

Optional. Directs watch to attempt resuming notifications starting after the operation specified in the resume token.

Each change stream event document includes a resume token as the _id field. Pass the entire _id field of the change event document that represents the operation you want to resume after.

resumeAfter is mutually exclusive with startAtOperationTime.

fullDocument string

Optional. By default, watch() returns the delta of those fields modified by an update operation, instead of the entire updated document.

Set fullDocument to "updateLookup" to direct watch() to look up the most current majority-committed version of the updated document. watch() returns a fullDocument field with the document lookup in addition to the updateDescription delta.

batchSize int

Optional. Specifies the maximum number of change events to return in each batch of the response from the MongoDB cluster.

Has the same functionality as cursor.batchSize().

maxAwaitTimeMS int

Optional. The maximum amount of time in milliseconds the server waits for new data changes to report to the change stream cursor before returning an empty batch.

Defaults to 1000 milliseconds.

collation document Optional. Pass a collation document to specify a collation for the change stream cursor.
startAtOperationTime Timestamp

Optional. The starting point for the change stream. If the specified starting point is in the past, it must be in the time range of the oplog. To check the time range of the oplog, see rs.printReplicationInfo().

startAtOperationTime is mutually exclusive with resumeAfter.

New in version 4.0.

Returns:A cursor that remains open as long as a connection to the MongoDB deployment remains open and the collection exists. See Change Events for examples of change event documents.

See also

db.watch() and Mongo.watch()

Behavior

  • db.collection.watch() only notifies on data changes that have persisted to a majority of data-bearing members.
  • The change stream cursor remains open until one of the following occurs:
    • The cursor is explicitly closed.
    • An invalidate event occurs; for example, a collection drop or rename.
    • The connection to the MongoDB deployment is closed.
    • If the deployment is a sharded cluster, a shard removal may cause an open change stream cursor to close, and the closed change stream cursor may not be fully resumable.
  • You can only use db.collection.watch() with the Wired Tiger storage engine.
  • db.collection.watch() is available for replica sets and sharded clusters:
    • For a replica set, you can issue db.watch() on any data-bearing member.
    • For a sharded cluster, you must issue db.watch() on a mongos instance.

Availability

Change stream is only available if "majority" read concern support is enabled (default).

Resumability

Unlike the MongoDB drivers, the mongo shell does not automatically attempt to resume a change stream cursor after an error. The MongoDB drivers make one attempt to automatically resume a change stream cursor after certain errors.

db.collection.watch() uses information stored in the oplog to produce the change event description and generate a resume token associated to that operation. If the operation identified by the resume token passed to the resumeAfter option has already dropped off the oplog, db.collection.watch() cannot resume the change stream.

See Resume a Change Stream for more information on resuming a change stream.

Note

  • You cannot resume a change stream after an invalidate event (for example, a collection drop or rename) closes the stream.
  • If the deployment is a sharded cluster, a shard removal may cause an open change stream cursor to close, and the closed change stream cursor may not be fully resumable.

Resume Token

The resume token _data type depends on the MongoDB versions and, in some cases, the feature compatibility version (fcv) at the time of the change stream’s opening/resumption (i.e. a change in fcv value does not affect the resume tokens for already opened change streams):

MongoDB Version Feature Compatibility Version Resume Token _data Type
MongoDB 4.0.7 and later “4.0” or “3.6” Hex-encoded string (v1)
MongoDB 4.0.6 and earlier “4.0” Hex-encoded string (v0)
MongoDB 4.0.6 and earlier “3.6” BinData
MongoDB 3.6 “3.6” BinData

With hex-encoded string resume tokens, you can compare and sort the resume tokens.

Regardless of the fcv value, a 4.0 deployment can use either BinData resume tokens or hex string resume tokens to resume a change stream. As such, a 4.0 deployment can use a resume token from a change stream opened on a collection from a 3.6 deployment.

New resume token formats introduced in a MongoDB version cannot be consumed by earlier MongoDB versions.

Full Document Lookup of Update Operations

By default, the change stream cursor returns specific field changes/deltas for update operations. You can also configure the change stream to look up and return the current majority-committed version of the changed document. Depending on other write operations that may have occurred between the update and the lookup, the returned document may differ significantly from the document at the time of the update.

Depending on the number of changes applied during the update operation and the size of the full document, there is a risk that the size of the change event document for an update operation is greater than the 16MB BSON document limit. If this occurs, the server closes the change stream cursor and returns an error.

Access Control

When running with access control, the user must have the find and changeStream privilege actions on the collection resource. That is, a user must have a role that grants the following privilege:

{ resource: { db: <dbname>, collection: <collection> }, actions: [ "find", "changeStream" ] }

The built-in read role provides the appropriate privileges.

Examples

Open a Change Stream

The following operation opens a change stream cursor against the data.sensors collection:

watchCursor = db.getSiblingDB("data").sensors.watch()

Iterate the cursor to check for new events. Use the cursor.isExhausted() method to ensure the loop only exits if the change stream cursor is closed and there are no objects remaining in the latest batch:

while (!watchCursor.isExhausted()){
   if (watchCursor.hasNext()){
      printjson(watchCursor.next());
   }
}

For complete documentation on change stream output, see Change Events.

Change Stream with Full Document Update Lookup

Set the fullDocument option to "updateLookup" to direct the change stream cursor to lookup the most current majority-committed version of the document associated to an update change stream event.

The following operation opens a change stream cursor against the data.sensors collection using the fullDocument : "updateLookup" option.

watchCursor = db.getSiblingDB("data").sensors.watch(
   [],
   { fullDocument : "updateLookup" }
)

Iterate the cursor to check for new events. Use the cursor.isExhausted() method to ensure the loop only exits if the change stream cursor is closed and there are no objects remaining in the latest batch:

while (!watchCursor.isExhausted()){
   if (watchCursor.hasNext()){
      printjson(watchCursor.next());
   }
}

For any update operation, the change event returns the result of the document lookup in the fullDocument field.

For an example of the full document update output, see change stream update event.

For complete documentation on change stream output, see Change Events.

Change Stream with Aggregation Pipeline Filter

The following operation opens a change stream cursor against the data.sensors collection using an aggregation pipeline to filter only insert events:

watchCursor = db.getSiblingDB("data").sensors.watch(
   [
      { $match : {"operationType" : "insert" } }
   ]
)

Iterate the cursor to check for new events. Use the cursor.isExhausted() method to ensure the loop only exits if the change stream cursor is closed and there are no objects remaining in the latest batch:

while (!watchCursor.isExhausted()){
   if (watchCursor.hasNext()){
      printjson(watchCursor.next());
   }
}

The change stream cursor only returns change events where the operationType is insert. For complete documentation on change stream output, see Change Events.

Resuming a Change Stream

Every document returned by a change stream cursor includes a resume token as the _id field. To resume a change stream, pass the entire _id document of the change event you want to resume from to the resumeAfter option of watch().

The following operation resumes a change stream cursor against the data.sensors collection using a resume token. This assumes that the operation that generated the resume token has not rolled off the cluster’s oplog.

let watchCursor = db.getSiblingDB("data").sensors.watch();
let firstChange;

while (!watchCursor.isExhausted()) {
   if (watchCursor.hasNext()) {
     firstChange = watchCursor.next();
     break;
   }
}

watchCursor.close();

let resumeToken = firstChange._id;

resumedWatchCursor = db.getSiblingDB("data").sensors.watch(
[],
   { resumeAfter : resumeToken }
)

Iterate the cursor to check for new events. Use the cursor.isExhausted() method to ensure the loop only exits if the change stream cursor is closed and there are no objects remaining in the latest batch:

while (!resumedWatchCursor.isExhausted()){
   if (resumedWatchCursor.hasNext()){
      printjson(watchCursor.next());
   }
}

See Resume a Change Stream for complete documentation on resuming a change stream.