Docs Menu

Docs HomeDevelop ApplicationsMongoDB Manual

Replica Set Configuration

On this page

  • Replica Set Configuration Document Example
  • Replica Set Configuration Fields

You can access the configuration of a replica set using the rs.conf() method or the replSetGetConfig command.

To modify the configuration for a replica set, use the rs.reconfig() method, passing a configuration document to the method. See rs.reconfig() for more information.

Warning

Avoid reconfiguring replica sets that contain members of different MongoDB versions as validation rules may differ across MongoDB versions.

The following document provides a representation of a replica set configuration document. The configuration of your replica set may include only a subset of these settings:

{
_id: <string>,
version: <int>,
term: <int>,
protocolVersion: <number>,
writeConcernMajorityJournalDefault: <boolean>,
configsvr: <boolean>,
members: [
{
_id: <int>,
host: <string>,
arbiterOnly: <boolean>,
buildIndexes: <boolean>,
hidden: <boolean>,
priority: <number>,
tags: <document>,
secondaryDelaySecs: <int>,
votes: <number>
},
...
],
settings: {
chainingAllowed : <boolean>,
heartbeatIntervalMillis : <int>,
heartbeatTimeoutSecs: <int>,
electionTimeoutMillis : <int>,
catchUpTimeoutMillis : <int>,
getLastErrorModes : <document>,
getLastErrorDefaults : <document>,
replicaSetId: <ObjectId>
}
}
_id

Type: string

The name of the replica set.

_id must be identical to the replication.replSetName or the value of --replSet specified to mongod on the command line.

Tip

See:

version

Type: int

An incrementing number used to distinguish revisions of the replica set configuration document from previous iterations of the configuration.

Changed in version 4.4: Replica set members use term and version to achieve consensus on the "newest" replica configuration. When members compare replica configuration documents, the configuration document with a larger term is considered the "newest". If term is the same or absent, the configuration document with the larger version is considered "newest".

term

Type: int

New in version 4.4.

Only available with featureCompatibilityVersion (fCV) "4.4" or later.

An incrementing number used to distinguish revisions of the replica set configuration document from previous iterations of the configuration. The term of a configuration document matches the term of the replica set primary which performed the reconfiguration. The primary increments its term each time it steps up after winning an election. The primary ignores the term field if set explicitly in the replSetReconfig operation.

Issuing a force reconfiguration removes the term field. When the primary next issues replSetReconfig without force, it sets the term to its own term.

Replica set members use term and version to achieve consensus on the "newest" replica configuration. When members compare replica configuration documents, the configuration document with a larger term is considered the "newest". If term is the same or absent, the configuration document with the larger version is considered "newest".

configsvr

New in version 3.2.

Type: boolean

Default: false

Indicates whether the replica set is used for a sharded cluster's config servers. Set to true if the replica set is for a sharded cluster's config servers.

protocolVersion

New in version 3.2.

Type: number

Default: 1

Starting in 4.0, MongoDB only supports protocolVersion: 1 and no longer supports protocolVersion: 0.

writeConcernMajorityJournalDefault

New in version 3.2.6.

Type: boolean

Default: true

Determines the behavior of { w: "majority" } write concern if the write concern does not explicitly specify the journal option j.

The following table lists the writeConcernMajorityJournalDefault values and the associated { w: "majority" } behavior:

Value
{ w: "majority" } Behavior
true

MongoDB acknowledges the write operation after a majority of the voting members have written to the on-disk journal.

Important

All voting members of the replica set must run with journaling when writeConcernMajorityJournalDefault is true.

If any voting member of a replica set uses the in-memory storage engine, you must set writeConcernMajorityJournalDefault to false.

If any voting member of a replica set uses the in-memory storage engine and writeConcernMajorityJournalDefault is true, "majority" write operations may fail. These include operations that inherently use "majority" write concern, such as the replSetStepDown command, or various mongosh methods that by default use "majority" write concern, such as user management methods and role management methods.

Starting in version 4.2 (and 4.0.13 and 3.6.14 ), if a replica set member uses the in-memory storage engine (voting or non-voting) but the replica set has writeConcernMajorityJournalDefault set to true, the replica set member logs a startup warning.

false

MongoDB acknowledges the write operation after a majority of the voting members have applied the operation in memory.

Warning

If any voting member of a replica set uses the in-memory storage engine, you must set writeConcernMajorityJournalDefault to false.

Starting in version 4.2 (and 4.0.13 and 3.6.14 ), if a replica set member uses the in-memory storage engine (voting or non-voting) but the replica set has writeConcernMajorityJournalDefault set to true, the replica set member logs a startup warning.

You cannot run transactions on a sharded cluster that has a shard with writeConcernMajorityJournalDefault set to false (such as a shard with a voting member that uses the in-memory storage engine).

Tip

See also:

members

Type: array

An array of member configuration documents, one for each member of the replica set. The members array is a zero-indexed array.

Each member-specific configuration document can contain the following fields:

members[n]._id

Type: integer

An integer identifier for the member in the replica set, unique among all members.

Starting in MongoDB 5.0, values may be any integer value greater than or equal to 0. Previously, this value was limited to an integer between 0 and 255 inclusive.

Each replica set member must have a unique _id. Avoid re-using _id values even if no members[n] entry is using that _id in the current configuration.

Once set, you cannot change the _id of a member.

Note

When updating the replica configuration object, access the replica set members in the members array with the array index. The array index begins with 0. Do not confuse this index value with the value of the members[n]._id field in each document in the members array.

members[n].host

Type: string

The hostname and, if specified, the port number, of the set member.

The hostname name must be resolvable for every host in the replica set.

Warning

members[n].host cannot hold a value that resolves to localhost or the local interface unless all members of the set are on hosts that resolve to localhost.

members[n].arbiterOnly

Optional.

Type: boolean

Default: false

A boolean that identifies an arbiter. A value of true indicates that the member is an arbiter.

When using the rs.addArb() method to add an arbiter, the method automatically sets members[n].arbiterOnly to true for the added member.

For the following MongoDB versions, pv1 increases the likelihood of w:1 rollbacks compared to pv0 (no longer supported in MongoDB 4.0+) for replica sets with arbiters:

  • MongoDB 3.4.1

  • MongoDB 3.4.0

  • MongoDB 3.2.11 or earlier

See Replica Set Protocol Version.

members[n].buildIndexes

Optional.

Type: boolean

Default: true

A boolean that indicates whether the mongod builds indexes on this member. You can only set this value when adding a member to a replica set. You cannot change members[n].buildIndexes field after the member has been added to the set. To add a member, see rs.add() and rs.reconfig().

Do not set to false for mongod instances that receive queries from clients.

Setting buildIndexes to false may be useful if all the following conditions are true:

  • you are only using this instance to perform backups using mongodump, and

  • this member will receive no queries, and

  • index creation and maintenance overburdens the host system.

Even if set to false, secondaries will build indexes on the _id field in order to facilitate operations required for replication.

Warning

If you set members[n].buildIndexes to false, you must also set members[n].priority to 0. If members[n].priority is not 0, MongoDB will return an error when attempting to add a member with members[n].buildIndexes equal to false.

To ensure the member receives no queries, you should make all instances that do not build indexes hidden.

Other secondaries cannot replicate from a member where members[n].buildIndexes is false.

members[n].hidden

Optional.

Type: boolean

Default: false

When this value is true, the replica set hides this instance and does not include the member in the output of db.hello() or hello. This prevents read operations (i.e. queries) from ever reaching this host by way of secondary read preference.

Hidden members can acknowledge write operations issued with Write Concern. For write operations issued with "majority" write concern, the member must also be a voting member (i.e. votes is greater than 0).

members[n].priority

Optional.

Type: Number between 0 and 1000 for primary/secondary; 0 or 1 for arbiters.

Default: 1.0 for primary/secondary; 0 for arbiters.

A number that indicates the relative likelihood of a replica set member to become the primary.

  • To increase the likelihood that a member becomes the primary, specify a higher priority value for that member.

  • To decrease the likelihood that a member becomes the primary, specify a lower priority value for that member.

Changing a member's priority triggers one or more elections. The election algorithm makes a best-effort attempt to elect the highest-priority member the primary. However, a lower-priority member may become the primary even if a higher-priority secondary is available.

If a lower-priority member becomes the primary, the server continues to periodically call elections until the highest-priority replica set member is the primary. The frequency at which the elections occur depends on the difference in priority between the elected member and the highest-priority member.

A member with a priority of 0 cannot become the primary.

Non-voting members (meaning members that have votes set to 0) must have a priority of 0.

members[n].tags

Optional.

Type: document

Default: none

A tags document contains user-defined tag field and value pairs for the replica set member.

{ "<tag1>": "<string1>", "<tag2>": "<string2>",... }

For more information, see Configure Replica Set Tag Sets.

members[n].secondaryDelaySecs

Optional.

Type: integer

Default: 0

The number of seconds "behind" the primary that this replica set member should "lag".

Use this option to create delayed members. Delayed members maintain a copy of the data that reflects the state of the data at some time in the past.

Delayed members can contribute to acknowledging write operations issued with Write Concern. However, they return write acknowledgment no earlier than the configured delay value. For write operations issued with "majority" write concern, the member must also be a voting member (i.e. votes is greater than 0).

members[n].votes

Optional.

Type: integer

Default: 1

The number of votes a server will cast in a replica set election. The number of votes each member has is either 1 or 0, and arbiters always have exactly 1 vote.

Members with priority greater than 0 cannot have 0 votes.

A replica set can have up to 50 members but only 7 voting members. If you need more than 7 members in one replica set, set members[n].votes to 0 for the additional non-voting members.

Non-voting (i.e. votes is 0) members must have priority of 0.

Starting in MongoDB 5.0, a newly added secondary does not count as a voting member and cannot be elected until it has reached SECONDARY state.

Non-voting members cannot acknowledge write operations issued with a "majority" write concern.

settings

Optional.

Type: document

A document that contains configuration options that apply to the whole replica set.

The settings document contain the following fields:

settings.chainingAllowed

Optional.

Type: boolean

Default: true

In MongoDB 5.0.1, 4.2.15, 4.4.7, and earlier, if settings.chainingAllowed is:

  • true, replica set secondary members can replicate data from other secondary members.

  • false, secondary members can replicate data only from the primary.

Starting in MongoDB 5.0.2, 4.2.16, and 4.4.8:

settings.getLastErrorDefaults

Optional.

Type: document

Unavailable starting in MongoDB 5.0.

Important

Starting in MongoDB 5.0, you cannot specify a default write concern with settings.getLastErrorDefaults other than the default of { w: 1, wtimeout: 0 } . Instead, use the setDefaultRWConcern command to set the default read or write concern configuration for a replica set or sharded cluster.

settings.getLastErrorModes

Optional.

Type: document

A document used to define a custom write concern through the use of members[n].tags. The custom write concern can provide data-center awareness.

{ getLastErrorModes: {
<name of write concern> : { <tag1>: <number>, .... },
...
} }

The <number> refers to the number of different tag values required to satisfy the write concern. For example, the following settings.getLastErrorModes defines a write concern named datacenter that requires the write to propagate to two members whose dc tag values differ.

{ getLastErrorModes: { datacenter: { "dc": 2 } } }

To use the custom write concern, pass in the write concern name to the w Option, e.g.

{ w: "datacenter" }

See Configure Replica Set Tag Sets for more information and example.

settings.heartbeatTimeoutSecs

Optional.

Type: int

Default: 10

Number of seconds that the replica set members wait for a successful heartbeat from each other. If a member does not respond in time, other members mark the delinquent member as inaccessible.

settings.electionTimeoutMillis

New in version 3.2.

Optional.

Type: int

Default: 10000 (10 seconds)

The time limit in milliseconds for detecting when a replica set's primary is unreachable. This setting controls failover sensitivity when using protocolVersion: 1. You can expect the failover timeout to not exceed the value of electionTimeoutMillis.

Consider the following when selecting a value:

  • Higher values result in slower failovers but decreased sensitivity to primary node or network slowness or spottiness.

  • Lower values result in faster failover but increased sensitivity to primary node or network slowness or spottiness.

The setting only applies when using protocolVersion: 1.

Note

When you step down a primary using rs.stepDown() or replSetStepDown without setting the force field to true, the stepped-down primary nominates an eligible secondary to call an election immediately.

settings.catchUpTimeoutMillis

New in version 3.4.

Optional.

Type: int

Changed in version 3.6:

Default: -1, infinite catchup time.

Time limit in milliseconds for a newly elected primary to sync (catch up) with the other replica set members that may have more recent writes. Infinite or high time limits may reduce the amount of data that the other members would need to roll back after an election but may increase the failover time.

The newly elected primary ends the catchup period early once it is fully caught up with other members of the set. During the catchup period, the newly elected primary is unavailable for writes from clients. Use replSetAbortPrimaryCatchUp to abort the catchup then complete the transition to primary.

The setting only applies when using protocolVersion: 1.

Note

To downgrade a replica set initiated in version 3.6 to 3.4, change catchUpTimeoutMillis from -1 to a positive number. Failure to change this value to a positive number causes nodes running version 3.4 to neither restart nor join the replica set.

settings.catchUpTakeoverDelayMillis

New in version 3.6.

Optional.

Type: int

Default: 30000 (30 seconds)

Time in milliseconds a node waits to initiate a catchup takeover after determining it is ahead of the current primary. During a catchup takeover, the node ahead of the current primary initiates an election to become the new primary of the replica set.

After the node initiating the takeover determines that it is ahead of the current primary, it waits the specified number of milliseconds and then verifies the following:

  1. It is still ahead of the current primary,

  2. It is the most up-to-date node among all available nodes,

  3. The current primary is currently catching up to it.

Once determining that all of these conditions are met, the node initiating the takeover immediately runs for election.

For more information on Replica Set Elections, see Replica Set Elections.

Note

Setting catchUpTakeoverDelayMillis to -1 disables catchup takeover. Setting catchUpTimeoutMillis to 0 disables primary catchup and consequently also catchup takeover.

settings.heartbeatIntervalMillis

New in version 3.2.

Internal use only.

The frequency in milliseconds of the heartbeats.

settings.replicaSetId

New in version 3.2.

Type: ObjectId

The ObjectId associated with the replica set and automatically created during rs.initiate() or replSetInitiate. You cannot change the replicaSetId.

←  Replication ReferenceReplica Set Protocol Version →